Commercial Storefront Door Replacement in Toronto & the GTA

There comes a point where repairing a storefront door stops making sense. The frame is corroded, the same closer keeps failing, the glass has been smashed one too many times, or the entrance simply doesn't meet today's accessibility, security, and energy standards. When that's where you are, Ontario Door Repair supplies and installs new commercial storefront door systems across Toronto and the GTA — custom aluminum-and-glass doors built to fit your opening, your hardware needs, and your brand.

We handle the whole project: measuring, sourcing, removing the old door, and installing the new one cleanly with minimal disruption to your business. Call 647-951-3510 for a free replacement quote.

When Replacement Beats Repair

A good contractor tells you when to repair and when to replace. If your door has any of the following, replacement is usually the smarter long-term investment:

• A corroded, bent, or racked frame that no longer holds the door square. Once the frame is compromised, no amount of hardware fixes the alignment permanently.
• Repeated, recurring failures — you keep paying for closers, pivots, or alignment on the same door every few months.
• Serious break-in or vehicle-impact damage where the door and frame are beyond economical repair.
• Accessibility requirements — you need wider clear openings, low-effort or automatic operation, and compliant hardware.
• Energy efficiency — an old single-glazed or poorly sealed door is bleeding heated and cooled air, and your utility bills show it.
• Security upgrades — you want stronger glass, better locks, and integrated access control.
• A dated look — the entrance no longer matches a renovated or rebranded storefront.

Not sure which side of the line you're on? If the frame is sound and it's a hardware issue, start with our commercial storefront door repair — it may be all you need. If the door keeps failing, read on.

What a New Storefront Door System Includes

A commercial replacement is more than a slab of glass in a frame. A complete storefront door system that we design and install includes:

• The door leaf — narrow, medium, or wide-stile aluminum, sized to the traffic and security level your business needs. Wider stiles carry heavier hardware and take more abuse.
• The frame and framing members — new or refurbished aluminum framing tied into your existing storefront glazing, properly anchored and squared.
• Tempered or laminated safety glass — code-compliant glazing, with laminated or insulated options for security and energy performance.
• A hardware package — closer, pivots or continuous hinge, pulls or push bars, deadlatch or mortise lock, and panic exit hardware where required.
• Thresholds and weatherseal — new commercial threshold, sweeps, and perimeter weatherstripping for a tight, efficient seal.
• Access control and locking — optional electric strikes, magnetic locks, and rekeying or commercial lock changes integrated at install.

To understand the door type and construction in depth, see our overview of aluminum and glass doors.

Custom Aluminum Storefront Doors, Built for Your Opening

Most GTA storefront openings aren't standard sizes, and off-the-shelf doors rarely fit right. We build custom aluminum storefront doors to your exact measurements, finish, and hardware spec. That means you choose the stile width, the glass type, the finish (clear anodized, dark bronze, black, or custom), the pull and hardware style, and the locking and access-control setup. The result fits the opening precisely, operates smoothly, and looks like it belongs on your storefront.

If you want to see how these systems are engineered and specified before you commit, our guide on how aluminum storefront doors are customized walks through the options and decisions involved.

Our Storefront Door Replacement Process

1. Free on-site consultation. We visit, measure the opening, assess the existing frame and glazing, and discuss your goals — accessibility, security, efficiency, or appearance.
2. Quote and spec. You get a transparent, itemized quote with a clear door and hardware specification. No surprises.
3. Fabrication and sourcing. We order or fabricate the custom door, glass, and hardware to match your spec.
4. Removal and installation. We remove the old door, prepare the opening, and install the new system — squared, anchored, sealed, and tested. We schedule around your hours to minimize downtime.
5. Final adjustment and handover. We fine-tune the closer and latch, confirm smooth operation and clean locking, and back the job with a warranty.

If your old door has already failed and left you exposed, we can secure the opening immediately through our emergency door repair service while the new door is fabricated.

Post-Break-In and Insurance Replacements

After a break-in, insurers often require full replacement rather than a patch repair — and they want it documented and done right. We handle break-in repairs across Toronto, from immediate securing of the opening to complete storefront door and glass replacement for stores. We provide clear documentation and itemized quotes suitable for insurance claims, and we move fast so your business reopens quickly and securely.

Why Toronto Businesses Choose Ontario Door Repair

• 20+ years installing and servicing commercial storefront doors across the GTA.
• Licensed and insured, with a warranty on every job.
• Custom fabrication so the door fits your opening, not a generic size.
• Free quotes and honest advice on repair vs. replacement.
• Available 24/7 to secure your opening while a new door is built.

Storefront Door Replacement Cost in Toronto (2026)

Replacement pricing depends on the door size, stile width, glass type, hardware package, and access-control options — so the accurate number comes from a free on-site quote. As a planning guide, here are typical GTA ranges for 2026:

• Standard aluminum-and-glass storefront door replacement (door + hardware, existing frame reused): roughly $2,500–$5,000.
• Full system replacement (new door, frame, glass, and hardware): roughly $4,500–$9,000+.
• Upgraded security or accessibility packages (laminated glass, panic hardware, electric strike or maglock, wider clear opening): added on top, quoted per spec.

These are typical ranges only — your final price always depends on the exact door, glass, and hardware and is confirmed with a free quote. Request one through our free estimate page or by calling 647-951-3510.

Serving Toronto and the Entire GTA

We replace commercial storefront doors throughout Toronto, Scarborough, North York, Etobicoke, East York, Mississauga, Vaughan, Markham, Richmond Hill, and Brampton, plus Hamilton, Burlington, Oakville, Ajax, Pickering, Whitby, Aurora, Newmarket, Thornhill, and Maple. Wherever your business is in the GTA, we'll come measure and quote for free. For broader commercial coverage, see our full Toronto commercial door repair service.