When the glass in your entry door cracks, fogs up between the panes or just looks dated, you usually don't need a new door. The glass insert can be taken out and replaced, and the door goes back to sealing and looking the way it should.
Tell us what's wrong with the glass. A photo of the door from outside and inside helps us quote quickly.
No obligation. We reply quickly, 24/7.

Knowing how the glass sits in the door explains why it can usually be replaced on its own.
Most steel and fiberglass entry doors in Toronto don't have loose glass puttied into the door. They have a glass insert, sometimes called a door lite: a sealed glass unit held between two plastic or composite frames, one on each side of the door. The frames are screwed together through the door, and the screw heads are hidden under plugs or trim on the inside face.
That design is good news when something goes wrong. The insert can be unscrewed, lifted out and replaced with a new one of the same size, without touching the door slab, the hinges, the lock or the frame. Inserts come in standard sizes: full-lite (almost the whole door), three-quarter, half-lite, small oval and decorative shapes, and narrow sidelight inserts.
Wood doors are different. The glass is usually held by wood stops nailed or screwed around the opening. That glass can also be replaced, but it takes more care to remove the stops without damaging the finish.
Commercial storefront and aluminum doors use a separate system entirely. If that's the door you have, see door glass repair and storefront glass door repair.

No new slab, no new frame, no trim or paint work.
A new insert restores the seal against drafts and water.
Swap clear glass for privacy, decorative or blinds-between-glass.
The most common reasons people call us about the glass in their front door.
A slammed door, a ball, a temperature shock in winter, or a break-in attempt.
The seal around the sealed unit has failed. Moisture gets in and condenses between the layers.
The gasket or caulking between the insert frame and the door has shrunk or cracked.
You want privacy, more light, or a style that matches a renovation.
Clear glass beside the deadbolt lets someone reach in after breaking it.
Blinds-between-glass inserts can jam or the tilt control can fail.
We can secure the opening the same day and measure for the new insert. Call 24/7 across Toronto and the GTA.
Most of the time the glass alone is enough. Sometimes the door itself is the problem.
If the door itself needs replacing, a new slab in the existing frame is often enough. See door slab replacement. If the frame is gone too, we'll quote a full front door replacement.
What you can choose when the insert is replaced.
The standard option for maximum light. Glass in doors must be safety glass, which means tempered or laminated, so that if it breaks it doesn't leave long sharp shards. Any replacement we install meets that requirement.
Frosted, rain, reed and other textured patterns let light in without letting people see through. A popular choice on front doors that face the street and on bathroom-side back doors.
Leaded, bevelled and patterned inserts in oval, arched and rectangular shapes. These are common on older Toronto homes and on new doors bought to match a heritage look.
Blinds sealed inside the glass unit, controlled by a small slider on the frame. They never collect dust and can't be damaged by pets or kids. Very common on back and side doors that open onto a deck or yard.
Two layers of glass bonded to a plastic interlayer. When it breaks, it cracks but stays in the frame, which makes it much harder to reach through to the lock. A sensible upgrade for glass close to the deadbolt.

The glass beside and above the door.
Sidelights are the narrow glass panels beside a front door, and transoms are the panels above it. They take the same kind of beating as the door glass: impacts, seal failure, and cracks from the frame moving over the years. Sidelight inserts can usually be replaced the same way as a door insert, one panel at a time.
Because sidelights sit right beside the lock, they're also a common target in break-ins. If yours was broken, we can install laminated glass in the replacement and check the lock side of the door at the same time. See break-in repairs and front door security upgrades.
From the first photo to the finished door.
We measure the insert frame from inside, not the visible glass, and note the door thickness.
Clear, privacy, decorative, blinds or laminated, in the same frame size.
If the glass is broken, we cover the opening the same day. See board-up.
Screw plugs are lifted, the inner frame is unscrewed, and the old unit is cut free of old sealant.
The opening is cleaned, fresh sealant goes on, and the new insert is set and screwed tight from inside.
We confirm the door still closes and locks properly and there are no drafts around the new glass.
Our climate is hard on sealed glass.
A front door can face minus twenty outside and plus twenty inside on the same day. The glass unit expands and contracts every time, and over years the edge seal gives way. That's when fog appears between the panes.
South- and west-facing doors painted a dark colour get very hot in summer. Heat speeds up seal failure and can crack glass that already has a small chip.
A door without a closer, or with a storm door that slams, sends a shock through the glass every time. Adjusting the storm door closer is worth doing when the glass is replaced.
When hinges wear or the frame moves, the door can twist slightly each time it closes. That stress goes straight into the glass insert. If the door rubs or has to be pushed to latch, it should be adjusted too. See door won't close or lock.
We quote after seeing the door and the glass you want.
For general numbers, see the residential door repair cost guide.
Often done alongside new door glass.
Glass door repair for homes and businesses.
A new door in your existing frame.
A complete new entry door and frame.
Stop drafts around the door itself.
Glass, locks and frames after a forced entry.
Cracks, fading and damaged skins.
Questions homeowners ask us.
Yes, in most steel and fiberglass doors. The glass is a separate insert held by screws and can be replaced in the same opening.
Measure the frame around the glass from the inside of the door, edge to edge. We confirm the size on site before ordering.
No. Fog between the layers means the seal has failed. The insert needs to be replaced.
Yes. As long as the new insert is the same size, you can choose a different glass style.
Yes. Glass in doors must be safety glass. We install tempered or laminated glass.
Yes. Sidelights and transoms are replaced the same way, one panel at a time.
The swap itself is usually done in one visit once the insert is ready. Broken glass can be secured the same day.
Yes. Send photos of the door from inside and outside to our WhatsApp at 647-866-0956.
Related help from our team.
These may help too: replacing the door but keeping the frame, front door security upgrades, weatherstripping replacement, common door problems in the GTA and multi-point lock repair. Other services: residential door repair, front entry door repair, patio door repair, sliding door repair and emergency door repair.
Local door pages near you.
Front door glass inserts, sidelights and decorative glass replaced by licensed, insured technicians across Toronto and the GTA.
📞 Call 647-951-3510 Request a Free Estimate