Automatic Door Repair Toronto (2026): Sliding & Swing Operators Fixed
Automatic sliding doors, swing door operators and accessibility push buttons repaired across Toronto & the GTA. Fast response for stores, offices and condos. Call 647-951-3510.
Get your automatic door fixed
Tell us what's wrong — we'll call you right back.
No obligation · Fast response · Serving Toronto & the GTA
Why automatic doors break down
An automatic entrance combines a door, a motor, sensors and a control board, and any one of them can stop the whole entrance.
Constant cycling
A busy entrance can cycle hundreds of times a day, wearing belts, rollers and gear trains.
Toronto winters
Salt, slush and grit in floor guides and tracks cause drag and jams.
Sensor problems
Dirty, bumped or misaligned sensors make doors stall, reverse or open by themselves.
9 automatic door problems we repair
Match your symptom to the likely cause, then call us when it needs a technician.
Door will not open
Power, the activation sensor, the control board or a jammed track can all stop the door.
Door opens by itself
A motion sensor picking up passers-by, signs or wind-blown objects will trigger the door.
Door closes on people
A failed safety sensor is a serious hazard and the door should be taken out of automatic mode.
Door drags or stops halfway
Debris in the floor guide, worn rollers or a slipping belt cause drag and stalls.
Push button does nothing
Wireless buttons lose batteries or pairing; wired buttons fail at the switch or the wiring.
Swing operator slams or is too slow
Opening speed, closing speed and hold-open time drift out of adjustment or the operator wears.
Broken glass or breakaway panel
Impacts break glass or knock breakaway panels out of their latches.
Door will not lock at night
Misalignment between the door and the lock or a failed electric lock stops the door from securing.
Loud grinding or clicking
Worn gears, rollers or a damaged belt make noise long before they fail.
Automatic door and commercial door services
One call for the door, the operator and the hardware.
Automatic Door Opener Installation
New operators and push buttons.
Learn more →Automatic Door Maintenance
Keep entrances running.
Learn more →Commercial Door Repair
Storefront, steel and glass.
Learn more →Aluminum & Glass Doors
Frames, glass and hardware.
Learn more →Door Closer Repair
Control and latch speed.
Learn more →Barrier-Free Doors
Accessibility in Ontario.
Learn more →Automatic and commercial entrances we service
Stores, offices, clinics and condo lobbies across the GTA.
What staff can check, and what needs a technician
Simple checks often get a door running again; safety faults always need a technician.
Safe checks
- Check the breaker and power switch
- Check the mode switch setting
- Clean salt and grit from the floor guide
- Move signs and mats away from sensors
- Replace push-button batteries
- Wipe sensor lenses gently
Call a technician
- Door closes on people
- Door stops or reverses repeatedly
- Grinding, clicking or burning smell
- Broken glass or breakaway panel
- Electric lock not securing
- Control board or motor fault
What automatic door repair costs (2026)
Cost depends on the door type, the failed part and access. You get a clear quote before work starts.
Service call & adjustment
Sensor adjustment, cleaning, settings and minor repairs.
Parts replacement
Sensors, rollers, belts, buttons, arms or locks.
Operator replacement
New operator or full automatic entrance upgrade.
GTA trade labour generally runs $50–$100/hour. For a full breakdown see our Commercial Door Repair Cost Toronto (2026 Guide) or request a free estimate.
Automatic door stuck open or closed?
Emergency response to secure your entrance across Toronto & the GTA.
Store owners, property managers and facility teams across the GTA call us to keep entrances open and safe.
Get a Free EstimateHow an automatic door repair works
Fast, safe and clear.
Call and describe the problem
Tell us the door type and what it is doing; photos or a short video help.
Diagnose and quote
We test power, sensors, drive and lock and explain the repair.
Repair and safety test
The door is repaired and its safety functions are tested before reopening.
Automatic door repair in Toronto: what owners and managers should know
An automatic entrance is often the first thing customers touch. When it stalls, opens on its own or will not lock at night, it costs sales, heat and security. Most failures come from a short list of causes: dirty or misaligned sensors, debris in the floor guide, worn rollers or belts, operator settings that have drifted, and electric locks that no longer line up. This guide explains each one and what a proper repair involves. For service, call 647-951-3510.
Sliding automatic doors
Sliding entrances hang from rollers in a header track and are guided at the floor. Over time the rollers flatten, the belt stretches and salt packs into the floor guide, especially near Toronto entrances in winter. The result is a door that hesitates, bangs at the end of travel or stops halfway. Cleaning, roller and belt replacement and re-tuning the operator restore smooth travel.
Breakaway panels
Many sliding entrances have breakaway panels that swing out in an emergency. After an impact they may not re-latch, which leaves the entrance unsecured. Re-setting and repairing the latches is a common call after a cart or delivery hits the door.
Swing door operators and accessibility buttons
Swing operators open a regular hinged door with a powered arm, usually from a push button. Problems include doors that open too fast or too slowly, close with too much force, or do nothing when the button is pressed. Speeds and hold-open time can be adjusted; worn arms, buttons, receivers and operators are replaced. Ontario accessibility expectations make a working push-button entrance important for many businesses; see barrier-free door requirements in Ontario.
Sensors and safety
Activation sensors open the door; safety sensors stop it from closing on people. Both can be knocked out of alignment by cleaning, signage or impacts. A door that closes on someone should be switched off immediately. After every repair, safety functions should be tested before the door goes back into automatic mode.
Locking an automatic entrance
At night the entrance must lock reliably. Misalignment, worn lock hardware or a failed electric lock or strike can leave a store exposed. We repair the lock and the alignment together; see electric strike repair and magnetic lock repair.
Repair or replace the operator?
Most automatic doors can be repaired with sensors, rollers, belts, buttons or arms. Replacement makes sense when the operator is very old, parts are no longer available, or the entrance needs an upgrade such as adding an accessible push-button operator to a manual door; see automatic door opener installation and automatic door maintenance.
Related commercial door guides
Daily automatic door check
A one-minute routine for staff when opening the store.
- Door opens fully and smoothly
- Door does not close on a person standing in the doorway
- Floor guide and threshold are clear
- Push buttons work from both sides
- Door locks properly at closing
- No new noise from the header or floor
Not sure what to look for? Read the top 10 signs your door needs immediate repair and common door problems in Toronto's weather.
Frequently asked questions
How much does automatic door repair cost in Toronto?
Why does my automatic door open by itself?
Is it safe to keep using a door that closes on people?
Can you repair accessibility push buttons?
Do you repair both sliding and swing automatic doors?
Do you offer emergency automatic door service?
Automatic door repair across the GTA
Get your automatic door working today
Call 647-951-3510 — commercial door service across Toronto & the GTA.
📞 Call 647-951-3510 Request a Free Estimate